Contemporary Research IP IP-HDTV - Manual (Page 11)

Add Channels Manually
To manually add channels:
• Select the Manual Add menu
• Press Select or f to enter the menu
• Use Up/Down arrows to select a channel number, or enter a number on the HD-RC remote.
• The tuner will first attempt to tune in the analog TV channel (XX-0)
• The window also displays the relative strength of the channel’s signal
• Press Surf to find the DTV equivalent of the channel (XX-1)
• If the station has other multi-cast channels (XX-2, XX-3, etc), they will be added automatically when
you select the primary DTV channel
• Press Select to add the channel to the list, again to remove the channel (dimmed text)
Note: This screen is a classic example of HD broadcasting operation. The tuner is set to UHF channel 45,
where the DTV program is broadcast. The channel identifier included with the broadcast is “99-9 HGTV”.
While the actual UHF channel is 45, the program will be found as 99-9 in the program list. Using this system,
it’s easy for people to find the DTV equivalent of the analog channel. The analog broadcast will appear as,
for example, 13-0, while the DTV version will be listed as 13-1.
Channel Edit Demo
Select EZ Demo, then press Select to view a demonstration of channel scanning and editing.
Contemporary Research 11 IP-HDTV HD Tuner