FXpansion Maul User Manual
Page 6
Maul Operation Manual
6
© 2012 FXpansion Audio
Drive stages
Maul features 3 Drive stages: Low, Mid and High. See the next section for full details of their
operation.
Drive stage routing
Maul's 3 drive stages can be used in 3 configurations:
Multi (Parallel)
This is the default configuration. Each of the 3 drive stages operates in parallel on the input signal.
Using the Frequency cutoff controls, each stage can operate on a specific range of the frequency
spectrum.
Serial
In Serial mode, each drive stage operates on the incoming audio in series - one after another. The
Frequency and Q settings (as well as the Width control in the Mid stage) are not available in this
mode - each drive stage operates on the entire signal feeding into it.
Single
In Single mode, only the Mid stage is operational - the other 2 stages are disabled. It operates on
the entire frequency spectrum - the C utoff, Q and Width controls are unavailable.