Fully expanded idr-8, Expanded multiple idr-8 system, Idr-8 user guide 31 – Compex Systems AP4530 User Manual
Page 31
iDR-8 User Guide
31
Fully expanded iDR-8
This diagram shows the iDR-8
with both the input and output expander fitted. Note the
connection of DR-Link which is daisy chained from one unit to
the next. If an iDR-switch unit is also fitted then daisy chain
DR-Link from the last expander to the switch box. Make sure
you plug into the correct DR-Link socket.
Use CAT5 STP cable. A pair of standard 2 metre cables is
provided with each expander. Maximum cable length is 250
metres. This means that the expander units can be used for
remote audio over CAT5 cable.
Expanded multiple iDR-8 system
This diagram
shows an iDR system with two iDR-8 units and both expanders
fitted. DR-Link is only required to connect to the expanders,
not between the main units. Make sure you connect DR-Link to
the iDR-8 associated with each expander. Make sure you plug
into the correct DR-Link socket. In this case do not daisy chain
DR-Link from one expander to the other.
Use CAT5 STP cable. Maximum cable length is 250 metres.
Maximum audio matrix is 16x16. The audio link cable carries 8
channels. This can provide a distributed system with 8
common channels and 8 local channels at each unit.
IN OUT
OUT
iDR-in
iDR-out
iDR
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
IN
OUT
16
15
14
13
12
11
10
9
IN
16
15
14
13
12
11
10
9
OUT
DR-LINK
IN
DR-LINK
IN
DR-
LI
NK
DR
-L
IN
K
DR
-LI
NK
AUD
IO
IN
OUT
IN OUT
iDR Unit A
8A
7A
6A
5A
4A
3A
2A
1A
8
7
6
5
4
3
2
1
IN
OUT
IN OUT
iDR Unit B
8B
7B
6B
5B
4B
3B
2B
1B
8
7
6
5
4
3
2
1
IN
OUT
OUT
iDR-in
16A 15A 14A 13A 12A 11A 10A
9A
IN
DR-
LINK
iDR-out
16B 15B 14B 13B 12B 11B 10B
9B
OUT