Connecting external signal processors – Crate Amplifiers CSM12 User Manual

Page 8

Advertising
background image

8

CSM8/12/16/24 Console Mixer

Connecting External Signal Processors:

There are several ways to use external signal processors with the CSM8/12/16/24. Each of the mixer’s input channels has its
own Insert jack, allowing a processor to be used on that particular channel. Figures 1 and 2 below show two ways of con-
necting a signal processor to the channel Insert jacks.

The mixer’s master section has two stereo effects loops available (Aux 3 and Aux 4), allowing a processor to be added to any
or all of the input signals. Figures 3 and 4 below show the basic connection of two types of stereo processors to the aux
loops.

Each channel’s Aux 3 and Aux 4 levels control the amount of signal sent from each channel to the aux loops. The master Aux
3 and Aux 4 Send, Return and Pan control the amount of signal sent to the processor, the amount of processed signal
returned to the mix, and how much of the processed signal is applied to the left and right output signals.

(See pages 4 through 6 for additional information on the insert jacks, the aux loops, and their controls.)

INSERT

JACK

INSERT

JACK

Figure 1: Connecting an external signal processor to the insert jack of the
mixer via the processor's insert jack:

INPUT

JACK

Figure 2: Connecting an external signal processor to the insert jack of the mixer
via the processor's input/output jacks:

OUTPUT

JACK

Stereo 1/4"
T/R/S cable

INSERT

JACK

(TIP = RETURN,
RING = SEND,
SLEEVE = GROUND)

INPUT

JACK

Figure 3: Connecting an external signal processor to the mixer's aux loop:
(Stereo processor with left/right output jacks)

AUX 3/

AUX 4

SEND

JACK

AUX 3/

AUX 4

RETURN

JACK

RIGHT

OUTPUT

JACK

LEFT

OUTPUT

JACK

(TIP = LEFT,
RING = RIGHT,
SLEEVE = GROUND)

INPUT

JACK

Figure 4: Connecting an external signal processor to the mixer's aux loop:
(Stereo processor with stereo output jack)

AUX 3/

AUX 4

SEND

JACK

AUX 3/

AUX 4

RETURN

JACK

STEREO

OUTPUT

JACK

(TIP = LEFT,
RING = RIGHT,
SLEEVE = GROUND)

Mono 1/4"
T/S cable

Mono 1/4"
T/S cable

Crate #CYC6MS
insert adapter cable

Crate #CYC6MS

insert adapter cable

Stereo 1/4"

T/R/S cable

(See your Crate Pro Audio dealer for the CYC6MS adapter cable.)

Advertising
This manual is related to the following products: