Applications: basic mono operation – Crate Amplifiers CSM12 User Manual

Page 9

Advertising
background image

9

STEREO

POWER AMP

(SPA1400, etc.)

HOUSE

SPEAKERS

(PS115HD,

PS215HDT,

etc.)

DUAL

GRAPHIC EQ

(LS3231,

LS2215)

CSM8/12/16/24

CH.1

INPUT

CH.2

INPUT

CH.1

OUTPUT

CH.2

OUTPUT

CH.1

OUTPUT

CH.2

OUTPUT

CH.1

INPUT

R

L

(PAN FULL

LEFT)

(PAN FULL

RIGHT)

CH.2

INPUT

MONITOR

SPEAKERS

(M112HD,

M115HD, etc.)

MIX

BALANCED

OUTPUT

AUX 1

SEND

A

B

D

C

Applications: Basic Mono Operation:

This setup shows one way of using the mixer and one stereo power amplifier to run both the house speakers and the stage

monitors. Two mono power amplifiers may be used in place of the one stereo amplifier.
Connect the components as follows:
(A) Connect a balanced or unbalanced signal cable between the mixer’s Mix Balanced Output and the power amplifier’s

Channel 1 Input.

(B) Connect a speaker cable between the power amplifier’s Channel 1 Outputs and the house speakers’ Inputs.
(C) Connect an unbalanced signal cable between the mixer’s Aux 1 Send and the power amplifier’s Channel 2 Input.
(D) Connect a speaker cable between the power amplifier’s Channel 2 Outputs and the monitor speakers’ Inputs.

(Note the optional use of a graphic equalizer in-line with the connections between the mixer and the power amplifier as shown below.)

Controlling The Mixer’s Output Levels:

• Monitors: Use the Aux 1 master slider (#30, page 6) to set the level of the output signal for the monitors.
• Mains (House Speakers): Use the Mix master slider (#32, page 6) to set the level of the output signal for the house speakers.

NOTE: The Mix output is a combination of the left and right channels. Therefore, the Left and Right master sliders (#31,

page 6) must be set so a signal of sufficient strength is available for the Mix master slider. Use the LED Output Meters

(#21, page 5) to visually monitor the output signal levels of the left and right channels.

Please note that the sample connections
shown in the Applications sections are
only guidelines. They are intended to
provide a starting point from which you
may assemble a system that will best suit
your particular needs.

Also note that the models referenced for
additional equipment are only sugges-
tions. Your Crate Pro Audio dealer can
assist you in selecting the components
best suited for your sound system.

CSM8/12/16/24 Console Mixer

Advertising
This manual is related to the following products: