Mode functions – Cobra Electronics CXR725 User Manual

Page 8

Advertising

Customer Assistance Warranty

Introduction

Operation

Mode Functions

Operation

Set DCS Privacy Codes

•

To select a DCS privacy code:
1. After selecting a channel, press the Mode

button until the DCS icon appears and the small

numbers flash on the display

(01 through 104).

NOTE
If CTCSS is turned

on at the channel

selected, the display will flash the
DCS icon and “OFF.

” To switch from

CTCSS to DCS, press the

Channel Up

Channel Down button while the display

is flashing “OFF.

” The display

will then show the small numbers flashing

and you will then be able

to proceed to step 2.

2. Press using the Channel Up or Channel Down

button to select a DCS privacy code. You can
hold the

Up or Down button for fast advance.

3. When your desired DCS privacy code is

displayed, choose one of the following:

a. Press the Mode button to enter the new

setting and proceed to other functions.

b. Press the Lock/Enter button to enter the

new setting and return to

Standby mode.

c. Do not press any buttons for 15 seconds

to enter the new setting and return to
Standby mode.

Mode Button

Channel Buttons

DCS Privacy Code

Nothing Comes Close to a Cobra

Set CTCSS Privacy Codes

•

To select a CTCSS privacy code:
1. After selecting a channel, press the

Mode button until the CTCSS icon appears and

the small numbers flash on the display (01

through 38).

NOTE
If DCS is turned

on at the channel

selected, the display will flash the
CTCSS icon and “OFF.

” To switch from

DCS to CTCSS, press the

Channel Up

Channel Down button while the display

is flashing “OFF.

” The display

will then show the small numbers

flashing and you will then be able

to proceed to step 2.

2. Press using the Channel Up or Channel

Down button to select a CTCSS privacy
code. You can hold the

Up or Down

button for fast advance.

3. When your desired CTCSS privacy code is