Great Planes CAP 580 Matt Chapman EP FlatOuts ARF - GPMA1112 - Manual (Page 13)

❏
2. Slide the wheels onto the axles, and secure them with
a D6 wheel collar. The flat side of the wheel collar should
be toward the wheel. Secure the wheel collar with a drop of
glue in the
teeth opposite the wheels.
❏
3. Make two wheel pants by gluing the inner and outer
wheel pant parts together. Be sure to make a right and a
left. Glue the inside of both wheel pants to the wheel collars.
❏
4. Snap the D5 tailwheel into the D4 tailwheel bracket.
❏
5. Slide the tailwheel bracket over the rudder and rudder
post. Glue the bracket to the rudder only. Do not glue the
bracket to the rudder post.
❏
1. Glue the elevator servo into the front servo mount in the
left side of the fuselage. The output shaft should be forward.
❏
2. Glue the rudder servo into the rear servo mount in the
right side of the fuselage. The output shaft should be forward.
Radio Setup
13