Rear underseat fuse block (driver’s side) – Cadillac CTS User Manual

Page 453

Advertising
background image

3. With the seat cushion lowered, push rearward

and then press down on the seat cushion until
the seat cushion snaps into place.

4. Push and pull on the seat cushion to make

sure it is locked into place.

5. Check to make sure the safety belts are

properly routed and that no portion of any
safety belt is trapped under the seat cushion.

Rear Underseat Fuse Block
(Driver’s Side)

The driver’s side rear fuse block is located under
the rear seat on the driver’s side of the vehicle.
The rear seat cushion must be removed to access
the rear fuse block. See “Removing the Rear
Seat Cushion” listed previously.

To access the fuse block, push in the two tabs
located at each end of the fuse block cover. Then
lift the cover off.

Fuses

Usage

SPARE

Not Used

SPARE

Not Used

AUDIO

Radio, OnStar Module

SPARE

Not Used

REAR DR MOD Rear Door Modules

SPARE

Not Used

DRIVER

DR MOD

Driver’s Door Module

BAS

Taillamps, Center High-Mounted
Stoplamp, Flasher Module, ABS
Module, Trailer Lamps

HDLP LEVELING

Headlamp Leveling System Chassis
Sensors (Export Only)

SPARE

Not Used

CCP

CCP (Climate Control Panel)

453

Advertising
This manual is related to the following products: