Canon CDI-M164-010 - Manual (Page 41)

39
Cancel Printing
• To cancel printing between images printed, press the SET
button.
A confirmation dialog appears. Select [OK] and press the SET
button. The printer will stop printing the current image and eject
the paper.
Restarting Printing
• Select [Resume] and press the SET button. The remaining
images can be printed.
• Printing cannot be restarted under the following circumstances.
• If the print settings have been changed before restarting.
• If the image for which the print settings were set has been
deleted before restarting.
• If there was very little free space on the memory card when
the printing was canceled.
If these circumstances apply, you can select [Print] in the print
order menu and reprint starting from the first image.
• If printing is canceled because the camera battery is depleted,
you are recommended to power the camera with a compact
power adapter (sold separately).
If you are using a battery pack or batteries, please use either a
fully charged battery pack or new batteries. After replacing the
spent battery pack or batteries, turn the camera power on
again.
Printing Errors
• An error message appears if an error occurs for some reason
during the printing process. When the error is resolved, printing
will automatically resume. If printing does not resume, select
[Continue] and press the SET button. If [Continue] cannot be
selected, select [Stop], press the SET button and restart the
print job. See List of Messages (p. 40) for details.
• On printers equipped with an operation panel, an error number
or message displays on the panel. Please refer to the printer
user guide for the remedies corresponding to the error numbers
or messages.