Heckler&Koch VP9 - Manual (Page 16)

30 31
FLUSH FITTING INSERTS FOR THE VP9 SLIDE
The charging supports on the rear of the VP9 slide can be replaced with flush fitting
inserts. To do so, the rear sight must be removed from the dovetail notch. With the rear
sight removed, the charging supports can then be slid upward out of the slide and the
flush fitting inserts installed in their place. The rear sight should then be replaced in the
slide dovetail. Although this modification can be made by the user/operator, it is strongly
recommended that only an HK certified armorer do so.
Figure 37 — Rear sight must be removed
to replace charging supports
Figure 38 — Installing flush fitting inserts
MAGAzINE LOADER
An HK pistol magazine loader is also available as an accessory. The magazine loader (HK
article number 217 830 ) makes loading of all VP9 magazines easier and more convenient.
Figure 39 — HK magazine loader for the VP9
Figure 40 — Using the HK magazine loader
For a complete list of accessories that fit the VP9 pistol, contact HK Customer Service.
CAUTION: Improperly de signed or in stalled ac ces so ries may re sult in dam age to the
rail system and/or the pistol. Such dam age is not cov ered under warranty. Be certain
to use only HK approved accessories and follow in stal la tion and pre cau tions care ful ly.
NOTE: If after reviewing this manual you still have ques tions, please contact HK
Customer Service at 706-568-1906 or by email: [email protected].