HONDA 2014 Crosstour - Owner's Manual User Manual
Page 105
104
uu
Locking and Unlocking the Doors
u
Customizing the Auto Door Locking/Unlocking Setting
*
Co
ntrols
■
Customizing Flow for Auto Door Unlocking Options
Steps
Ignition Switch Unlock Mode
Park Unlock Mode
Off
To unlock driver’s door
To unlock all doors
To unlock driver’s door
To unlock all doors
1
Apply the parking brake. Make sure the shift lever is in
(
P
.
2
Turn the ignition switch to ON
(
w
.
3
The driver’s door must be closed at this stage.
Open the driver’s door.
4
Move the shift lever out of
(
P
with the brake pedal
depressed.
—
5
Press and hold the rear of the master door lock
switch on the driver’s door for more than five
seconds. You will hear a click twice.
6
Release the switch.
Keep pressing the switch
for another five seconds
to hear one more click.
Release the switch.
Keep pressing the switch
for another five seconds
to hear one more click.
Release the switch.
7
Move the shift lever to
(
P
.
—
8
Turn the ignition switch to LOCK
(
0
within five seconds.
u
Customization is completed.
14 CROSSTOUR-31TP66400.book 104 ページ ２０１３年１０月４日 金曜日 午後２時３２分