HONDA 2014 Crosstour - Owner's Manual - Manual (Page 496)

495
uu Checking and Maintaining Wiper Blades u Changing the Rear Wiper Blade Rubber
Continued
Main
tenan
ce
Changing the Rear Wiper Blade Rubber
1. Raise the wiper arm off.
2. Pry on the edge of the lock tab using a flat-
tip screwdriver to push it up.
u Wrap the flat-tip screwdriver with a cloth
to prevent scratches.
3. Slide the wiper blade out from the end with
the indent.
1 Changing the Rear Wiper Blade Rubber
NOTICE
Avoid dropping the wiper arm; it may damage the
rear window.
Lock Tab
Blade
14 CROSSTOUR-31TP66400.book 495 ページ ２０１３年１０月４日 金曜日 午後２時３２分