Clarity 440 - Manual (Page 24)

Caller ID Operations
24
The next record is shown automatically or
- NO CALLS - if the list is empty.
■
At anytime, user can press “FLASH”
button one time to go back to
standby mode.
Or
■
It will go back to standby auto-
matically at 30 seconds time out
if there is no action.
Deleting All Caller ID Information
While reviewing the Caller ID, press and
hold the DEL/CH button for two seconds. LCD
will flash DELETE ALL ?.
Press DEL/CH to confirm.
LCD will display ALL CID and DELETED for 2
seconds and then - NO CALLS -.
■
At anytime, user can press “FLASH”
button one time to go back to standby
mode. Or
■
It will go back to standby automati-
cally at 30 seconds time out if there
is no action.
Example 2:
Stored Long Distance Service code: 1.
Stored area code: 770.
Stored incoming call number 413-456-7890.
1. Pressing the ENTER key will show
blinking 413-456-7890.
2. Pressing the TALK or ENTER key
again will dial out 4134567890.
OR
3. Pressing the UP( ▲ ) key will show
blinking 1-4134567890. Press
TALK or ENTER key will dial out
14134567890.
OR
4. Press UP ( ▲ ) key will show blinking
413-456-7890 again.
DELETE CALLER ID INFORMATION
Delete One Caller ID Information
While reviewing the Caller ID, press DEL/CH
button to delete the displayed caller informa-
tion. LCD will flash DELETE ?.
Press DEL/CH to confirm. CID DELETED will be
displayed for 2 seconds.
PM080404_C440_RevB_E#34CA7F.qxd 8/14/04 15:08 Page 24