Crosley CR-78 - Manual (Page 11)

TRACK
After reading TOC When there is no disc
Reading TOC Tray open
TRACK REPEAT
All track repeat
TRACK REPEAT
One track repeat (flashing)
1
To load a CD, press the OPEN/CLOSE button
one time. This will open the CD drawer.
2
Load the desired CD with the label facing up.
Press the OPEN/CLOSE button once more to
close the CD drawer. Once closed, the CD player
will begin to read the track information. When
finished reading, the display will read “DISC.”
Track information will include the total playing
time of CD and the number of tracks on the CD.
3
Press the PLAY/PAUSE button to begin
playback. Playback will start at the beginning of
track 1.
4
To skip to a different track, press the FORWARD
SKIP or BACKWARD SKIP button until you
reach the desired track number. Each press will
change the track number by one. Pressing
FORWARD SKIP will advance forward from
track to track. Pressing the BACKWARD SKIP
button will skip backwards from track to track.
5
To fast forward during playback, press and hold
the FORWARD SKIP button. Fast forwarding
stops when the button is released. To rewind
(reverse) playback, press and hold the
BACKWARD SKIP button.
6
To pause playback, press the PLAY/PAUSE
button. To continue playback, press the
PLAY/PAUSE button once more.
7
To repeat playback of a single track or the whole
disk, press the REPEAT button. Pressing this
button once will repeat only the selected track
and a plashing "repeat" will appear on the display.
Pressing the repeat button twice will repeat the
whole CD when it reaches the end and repeat
will appear but will not flash. Pressing repeat a
third time will turn off the repeat function.
8
To stop playback, press the STOP button.
9
While playback is stopped, you can press the
INTRO button to play the first 10 seconds of
each track.
Playing a CD
TRACK
Playing track 1
While paused
TRACK
10
CD Player