IC Realtime 2 Megapixel 3-9mm VF Full HD Vandal-proof IR Network Dome Camera (ICIPD2000VIR) - Manual (Page 21)

15
external
connected
cable
4
LAN
RJ45 network
port
Ethernet port Network cable port.
5
I/O I/O port /
It includes alarm input/output, audio
and analog output.
6
RESET Reset button /
Reset button. It is to restore factory
default setup.
7
AUTO
FOCUS
5-direction button /
Adjust lens angle of view and
definition.
8
Status
indicator
light
/ / Display device running status.
9
Fan port / /
Connect to fan to reduce device
internal problem.
Please note this component is
optional.
10
Micro SD
Micro SD card
slot entry Micro SD
card
Connect to Micro SD card to realize
local storage.
11
POWER 12V power port /
The power port of the external
connected cable.
Default input is DC 12V.
12
LAN Network port Ethernet port
The network port of the external
connected cable.
Connect to standard Ethernet port.
Support PoE.
Please refer to the following sheet for I/O port cable function information.
Port
Name
Cable SN Cable Port Name Function Description
I/O Port
1
ALARM_NO
Alarm output port. Output alarm signal to
alarm device.
NO: Normal open alarm output end.
2
ALARM_COM Alarm output public end.
3
GND Ground end.
4
ALARM_IN
Alarm input port. It is to receive the on-off
signal from the external alarm source.
5
GND Ground end.
6
AUDIO_IN
Input audio signal. It is to receive the analog
audio signal from the devices such as
pickup.
7
AUDIO_OUT
Output audio signal to devices such as
sound box.
8
GND Ground end.
9
VIDEO_OUT
Output analog video signal. It can connect
to TV monitor to view video.
2.3 Bidirectional talk
2.3.1 Device-end to PC-end
Device Connection
Please connect the speaker or the MIC to the audio input port of the device. Then connect the earphone
to the audio output port of the PC.