Interlogix MCR200-1T/1CX - Manual (Page 11)

IFS MCR200-1T/1CX User Manual 5
LED Indicators
System
LED Color Function
On Power ON
PWR Green
Off Power OFF
VDSL
LED Color Function
On Indicates that the VDSL link is established.
Fast
Blinking Indicates that the VDSL link is at training
status (about 10 seconds).
LNK/ACT Green
Slow
Blinking
Indicates that the VDSL link is at idle status.
CO Green On
Indicates the VDSL Bridge is running at CO
mode.
CPE Green On
Indicates the VDSL Bridge is running at CPE
mode.
10/100Base-TX Port
LED Color Function
On Indicates that the port link is On.
Blinking
Indicates that the Converter is actively
sending or receiving data over that port.
LNK/ACT Green
Off Indicates that the port link is Off.
On
Indicates that the port is operating at
100Mbps.
100 Green
Off
Indicates that the port is off or operating at
10Mbps.
Rear Panel
The units’ rear panel provides a simple interface for monitoring
the MCR200-1T/1CX.