Interlogix MCR200-1T/1CX - Manual (Page 19)

IFS MCR200-1T/1CX User Manual 13
Power Information
The power input of MCR200-1T/1CX is a 2.5mm type in the
central post and requires +5VDC power input. It will work with
the supported power supply, as well as the MCR-R15 media
converter rack chassis. If you need assistance regarding the
correct power supply, please contact your local sales
representative.
2.5mm
DC Receptacle 2.5mm
+5V for each slot
The MCR-R-15 DC outputs are a 2.5mm type that are designed to
power the MCR family of media converters. Do not install any unit that
is not supported by this rack, as this may cause damages on media
converter and the rack backplane connectors.