Interlogix MCR200-1T-1TW - Manual (Page 6)

IFS MCR200-1T-1TW User Guide 3
The UTC VDSL2 Converter provides a much cheaper replacement and
smooth migration for existing Long Reach Ethernet (LRE) networks.
The cable specifications of the connection are listed as following:
■ 10Base-T, Category 3, 4 or 5 UTP
■ 100Base-TX, Category 5, 5e or 6 UTP
■ Ethernet over VDSL2, Twisted-pair telephone wires
The two drawings pictures are typical applications diagrams for the
Ethernet over VDSL2 Converter.
Slave device (CPE) must connect to Master device
(CO) through the telephone wire or coaxial cable. It
is not allow connecting like Master to Master or
Slave to Slave. To define the MCR200-1T-1TW to
CO or CPE, please refer to “
MODE DIP Switch ” on
page 9 for more detail.