Interlogix NS2503-24P/2C User Manual - Manual (Page 16)

NS2503-24P/2C User Manual
16
■ Reset button
On the left side of the front panel, the reset button is designed for rebooting the Managed Switch without a power cycle.
The following is the summary table of Reset button functions
:
Reset Button Pressed and Released Function
About 5 seconds Reboot the Managed Switch.
About 10 seconds
Reset the Managed Switch to Factory Default configuration.
The Managed Switch will then reboot and load the default
settings as below:
。 Default Password: admin
。 Default IP address: 192.168.0.100
。 Subnet mask: 255.255.255.0
。 Default Gateway: 192.168.0.254
LED Indications
The front panel LEDs indicates instant status of port links, data activity and system power.
NS2503-24P/2C LED indicators
Figure 2-2: NS2503-24P/2C LED Panel
 System
LED Color Function
PWR Green Illuminates to indicate that the Switch has power.
SYS Green Illuminates to indicate the system is on.
 Alert
LED Color Function
PWR Alert Green
Illuminates to indicate that the PoE power supply has failed.
FAN1 Green
Illuminates to indicate that the FAN1 has failed.
FAN2 Green
Illuminates to indicate that the FAN2 has failed.
FAN3 Green
Illuminates to indicate that the FAN3 has failed.