Interlogix GE-DSSG-244-POE User Manual - Manual (Page 194)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
192
TACACS+ Authentication Server Configuration
The table has one row for each TACACS+ Authentication Server and a number of columns, which are:
Object Description
• # The TACACS+ Authentication Server number for which the configuration below
applies.
• Enabled Enable the TACACS+ Authentication Server by checking this box.
• IP Address/Hostname The IP address or hostname of the TACACS+ Authentication Server. IP address
is expressed in dotted decimal notation.
• Port The TCP port to use on the TACACS+ Authentication Server. If the port is set to 0
(zero), the default port (49) is used on the TACACS+ Authentication Server.
• Secret The secret - up to 29 characters long - shared between the TACACS+
Authentication Server and the switch.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
RADIUS Overview
This page provides an overview of the status of the RADIUS servers configurable on the Authentication configuration page. The
RADIUS Authentication/Accounting Server Overview screen is shown
Figure 4-11-8 .
Figure 4-11-8 RADIUS Authentication/Accounting Server Overview page screenshot
The page includes the following fields: