Interlogix GE-DSSG-244-POE User Manual - Manual (Page 354)

User’s Manual of NS3601-24P/4S Series
352
Set key1 for port1~4
SWITCH/>lacp key 1-4 1
LACP Role
Description:
Set or show the LACP role.
Syntax:
LACP Role [<port_list>] [active|passive]
Parameters:
<port_list>: Port list or 'all', default: All ports
active : Initiate LACP negotiation
passive: Listen for LACP packets
(default: Show LACP role)
Default Setting:
active
Example:
Set passive for port1~4
SWITCH/>lacp role 1-4 passive
LACP Status
Description:
Show LACP Status.
Syntax:
LACP Status [<port_list>]
Parameters:
<port_list> : Port list or 'all', default: All ports
Example:
Show LACP status of port1~4
SWITCH/>lacp status 1-4
Port Mode Key Aggr ID Partner System ID Partner Port
---- -------- ----- ------- ----------------- ------------
1 Disabled 1 - - -
2 Disabled 1 - - -
3 Disabled 1 - - -
4 Disabled 1 - - -
LACP Statistics
Description:
Show LACP Statistics.
Syntax:
LACP Statistics [<port_list>] [clear]
Parameters:
<port_list>: Port list or 'all', default: All ports
clear : Clear LACP statistics
Example:
Show LACP statistics of port1~4