Installation, Mount the camera – Interlogix TVD-6125VE-2 User Manual User Manual
Page 6
4
TruVision TVD-6120VE-2 / TVD-6125VE-2 Camera User Manual
Installation
Please check the package contents and make sure that the device in the
package is in good condition and all the assembly parts are included.
To install the camera you will need to prepare the mounting surface, mount the
camera, make cable connections, and adjust the lens.
Note: Before installing, please ensure that the mounting surface is strong enough
to withstand three times the weight of the camera. If the mounting surface is not
strong enough, the camera may fall and cause serious damage.
Mount the camera
To mount the camera:
1. Prepare the mounting surface.
2. Remove the dome cover.
3. Secure the camera to the mounting surface with screws.
4. Remove the IR LED cover to adjust the lens and the viewing angle.