Interlogix TVD-6125VE-2 User Manual - Manual (Page 7)

TruVision TVD-6120VE-2 / TVD-6125VE-2 Camera User Manual 5
Connect the cables
To make the cable connections:
1. Connect a 12 VDC or 24 VAC power supply to the power input.
2. Connect a coaxial cable from the camera’s BNC connector to a CCTV
monitor or video recording device.
Adjust the lens
The camera is mounted on a pan-tilt-twist (3-axis grimbal) rotating platform so
that it is easy to adjust the camera orientation.
To adjust the lens:
1. Rotate the panning table to adjust the panning position of the camera. The
adjusting range is from 0 to 355 degrees.
2. Rotate the tilting table to adjust the tilting position of the camera. The
adjusting range is from 0 to 75 degrees. Tighten the tilting table lock screw.
3. Rotate the lens to adjust the azimuth angle of the image. The adjusting range
is from 0 to 355 degrees.
Rotation 0-355°
Tilt 0-75°
Pan 0-355°
4. Adjust the lens to obtain the appropriate angle of view and the optimum focus.
Tighten the focus lock lever.
5. Replace the IR LED and dome covers on the camera.
6. Secure the dome cover with screws.