Interlogix TVC-7120-1 User Manual - Manual (Page 13)

TruVision TVC-7120-1 Camera User Manual 11
Adjust the picture characteristics
In the Setup Menu, go to Pict Adjust and select the options to be modified.
Set the camera image characteristics such as brightness, contrast, sharpness,
hue, and saturation (called “Gain” here) of the picture. The parameters of each
can be set between 0 and 255.
Use the mirror function to flip the camera image horizontally so that it is correctly
orientated for viewing. Default setting is Off.
Set the ATR level
This feature is similar to WDR (Wide Dynamic Range). It is used when there are
both bright and dark areas in the picture. It helps improve the contrast between
objects.
In the Setup Menu, go to ATR and select the desired luminance and contrast
parameters.
Luminance: Select the desired luminance level - High, MID (default), LOW.
Contrast: Select the desired contrast level - MID, HIGH, LOW, MIDLOW and
MIDHIGH.
Set the motion detection
Use this function to identify when a moving object passes in front of the camera.
Up to four motion detection areas can be configured, each by size and location
on-screen.