Set the motion detection, Set the privacy areas – Interlogix TVD-7125VE-2 User Manual User Manual

Page 15

Advertising
background image

TruVision TVD-7120VE-2 / TVD-7125VE-2 Camera User Manual

13

Luminance: High, Medium (default), Low

Contrast: High, Midhigh, Mid (default), Midlow, low

Set the motion detection

Use this function to identify when a moving object passes in front of the camera
to activate an alarm. Up to four motion detection areas can be configured, each
by size and location on-screen.

In the Setup Menu, go to

Motion Det

and select the desired parameters. Default

setting is Off.

Detect Sense: Set the sensitivity level for motion detection. A higher value is
more sensitive.

Block Disp: When enabled, any movement detected will be tracked on-
screen. Press Enter to enable or press the button again to cancel it.

Monitor Area: When enabled, a square grid is displayed on-screen. It can
only be enabled if Block Disp is also enabled.

Area Sel: Up to four motion-sensitive areas can be set. Set the size and
position of each one.

Set the privacy areas

Use this function to mask out selected areas of the image. Up to eight privacy
mask areas can be configured, each by size and location on-screen.

Note: Only four privacy mask areas can be set when motion detection is
enabled.

Advertising
This manual is related to the following products: