Interlogix TVD-7125VE-2 User Manual - Manual (Page 16)

14 TruVision TVD-7120VE-2 / TVD-7125VE-2 Camera User Manual
In the Setup Menu, go to Privacy and select the desired parameters.
Area Sel: Up to eight privacy masks can be set. Select a mask and then set
its size and position values using Top, Bottom, Left and Right.
Color: Select the color of the privacy mask.
Transp: Select the transparency shade of the privacy mask. The privacy
mask is fully transparent at value 0.00 and not transparent at 1.00.
Mosaic: Enable this option to mask an area with a mosaic effect. Default is
Off.
Set the Day/Night mode
In the Setup Menu, go to Day/Night and select the desired mode. The Day/Night
mode has four options: Auto, Color, B/W, and EXT1/EXT2.
Select “Color” to manually set the camera to color (day) mode.
Select “Auto” so that the camera can automatically switch between day (color)
and night (black and white) mode.
Auto mode:
Burst: Enable/disable the color burst component of the video signal when the
camera switches to B/W. ON mode maintains the same color signal in B/W so
that the video signal provides better compatibility with certain color
equipment. OFF mode removes the color burst signal B/W video and increase
the total TV lines.