Interlogix TVD-4101 - Manual (Page 22)

20 TruVision TVD-2101/4101 Dome Camera User Manual
Sharpness: Set the image sharpness level between 0 and 31. Setting the
sharpness too high will make your pictures look pixelated, like old computer
graphics. However, setting the sharpness level too low will make everything look
soft and blurry.
Monitor: Select the monitor type that is closest to the type you are using. In the
Monitor submenu, there are CRT and LCD options. You can also manually
adjust the gamma, blue gain, and red gain levels for the selected monitor type.
Lens Shading: Enable this option to brighten the edges of the camera image.
• Level: Set the level of the lens shading correction. The values range
from 0 to 60
• H-center: Set the horizontal center location. The values range from 0 to
255.
• V-center: Set the vertical center location. The values range from 0 to
255.
Defect: If the camera’s image sensor displays some defective pixels, this could
be due to them responding to light exposure differently compared to the
surrounding pixels. Use the Defective Pixel Correction (DPC) function to enable
the camera to digitally correct defective pixels using its image signal processor.