Interlogix TVD-4101 - Manual (Page 24)

22 TruVision TVD-2101/4101 Dome Camera User Manual
To enter a character: Move the cursor to the desired character and press Enter to select
it. It appears in the input line. Repeat the process until all
characters are entered.
To move a character: Enter the position in the input line, move the cursor in the
command line to ← or → and press Enter.
To clear the input line: Move the cursor to CLR and press Enter.
To delete a character in the
input line: Select the character so that it blinks. Then move the cursor to CLR
on the command line and press Enter.
To position the camera ID
on-screen: Move the cursor to POS and press Enter. The menu disappears
on-screen and the camera ID is displayed on the monitor. Use the
menu button to move the camera ID to the desired position. Press
Enter. The menu reappears. Select Return to return to the previous
menu.
RS485: This function allows you to configure the camera’s RS485 protocol
settings.
• Camera ID: Set the camera ID. The values range from 1 to 255.
• ID display: Enable or disable the ID display on screen. Press LEFT or
RIGHT enable or disable.