Interlogix TruVision Intelligent IP Dome Installation Manual - Manual (Page 31)

Installation Guide 27
2) Hold the plastic plate and rotate the camera to adjust
the panning angle [0~350°].
3) Push the lens forward and backward to adjust the
tilting angle [0~80°].
4) Rotate the lens to adjust the azimuth angle of the
camera [0~350°].
5) Tighten the lock screw.
6. Re-attach the dome liner and bubble to the camera.
T i l t 8 0
°
P a n 3 5 0
°
R o t a t i o n 3 5 0
°