Interlogix TruVision IP Megapixel PTZ Installation Manual - Manual (Page 15)

Installation Guide 15
3. Click the Configuration tab on the top of the screen
and select the parameter to change
Figure 2: Example of a configuration window
Table 1: Overview of the Configuration panel
Configuration folders Description
System Defines device basic information including
SN and the current firmware version, time
settings, and maintenance parameters.
Network Defines the network parameters required
to access the camera over the internet.
Video/Audio Defines recording parameters.
PTZ Defines the PTZ parameters.
Image Defines the image parameters, OSD
settings, overlay text, and privacy mask.
Security Defines who can use the camera, their
passwords and access privileges, RTSP
authentication, IP address filter, and telnet
access.
Events Defines motion detection, tamper-proof,
alarm input/output, exception, and
snapshot configuration.