Interlogix TruVision IP Camera Installation Guide - Manual (Page 18)

18 Installation Guide
panning position of the camera. Rotate the tilting
axes to adjust the tilting position of the camera.
Rotate the lens table to adjust the azimuth angle of
the image.
2) Zoom and focus adjustment.
Loosen the zoom lever and move the lever between
T(Tele) and W(Wide) to obtain the appropriate angle
of view.
3) Tighten the zoom lever.
Loosen the focus lever and move the lever between
F(Far) and N(Near) to obtain the optimum focus.
Tighten the focus lever.
Tilting
Rotation
Rotation