Interlogix TruVision IP Open Standards Dome Cameras Quick Start - Manual (Page 10)

EN 8 Quick Start Guide
Wedge dome cameras:
See Figure

(Wedge dome camera connections).
1. Power input connector. Connect +12 VDC power supply. Optional.
2. Ethernet RJ45 PoE connector. Connect to the network devices.
3. Lens.
4. Power LED.
5. Lens positioning screws.
6. Network status LEDs.
7. Reset switch. Click to reset all parameters to factory default.
Accessing the SDHC card
Insert an SDHC card up to 32GB for local storage in the dome
cameras (see Figure

, item

). The card is not supplied with the
camera.
Video and log files stored on the SDHC card can only be accessed via
the Web browser. You cannot access the card using TruVision
Navigator or a recording device.
Note: There is no SDHC card slot in the wedge dome cameras.
Accessing the camera over the internet
Use the camera Web browser to access and configure the camera
over the internet. Only one camera is accessible from a single Web
browser window.
To access the camera online:
1. In the Web browser enter the camera’s IP address (default is
192.168.1.70). The Login dialog box appears.
Note: Ensure that the Active X controls are enabled.
2. Enter your user name and password.
User name: admin
Password: 1234