Interlogix DVR 60 Quick Start - Manual (Page 8)

EN - 8 TruVision DVR 60 Quick Start Guide
10. Click Apply and then OK button to return to the
Alarm Management menu.
To set up motion detection alarms:
1. Click the Cameras icon in the main menu. On the
Camera Management screen select the camera to
configure for motion detection, and then click
Setup and Advanced tab to display the Advanced
Camera Settings menu.
2. Check the Motion Detection box to enable motion
detection for this camera.
3. Click Area Setup (next to the Motion Detection
box) and drag the mouse across the screen to
define the motion detection area.
4. Right-click the mouse to open the setup menu,
and click Sensitivity to set the motion detection
sensitivity. A higher value indicates higher
sensitivity and vice versa. Click
Exit in the setup
menu to return to the Camera Settings screen.
5. Click Rules to open the Rules screen. Under the
Associated Cameras tab select the cameras to
be triggered for recording when motion is
detected. Click
Apply to save your settings.
6. Under the Schedule tab, define a recording
schedule for motion detection.
7. Under the Notifications tab, define the alarm
response method.
8. Copy the changes to another camera, if required.
9. Click Apply and then OK button to return to the
Camera Management menu.
Connecting a keypad
The KTD-405 keypad controls the dome cameras
through the TVR 60 and not directly.
Connect the RS-485 bus of the KTD-405 I/O box to
the TVR 60 Keypb A/B screw terminal port. See
Figure 7 below.
Set the TVR 60 device address in the Display menu
and enter “1” as the device address. Set the keypad to
zone 1.
Figure 7: Connecting the KTD-405 keypad
Viewing an alarm event list
To view an alarm event list:
1. While in Live mode, press the Search button on
the remote control or front panel, or right-click the
mouse and select the Advanced Search button.
The Advanced Search screen appears.
2. In the Video Type box, select one of the following:
• Motion
• Alarm
•
Motion or Alarm
• Motion and Alarm
3. Click Search. A list of files is produced based on
the search criteria specified.
Contact information
For contact information see our Web site:
www.interlogix.com or www.utcfssecurityproducts.eu