iStorage diskAshur Pro Manual - Manual (Page 4)

4
About the diskAshur PRO
Package contents
• diskAshur PRO drive with
integrated USB 3.0 cable
• Travel pouch
• USB Y-cable
• Quick Start Guide
Looking for the highest level of
security for your data while utilizing
the fastest USB 3.0 speeds?
Look no further than the
diskAshur PRO 140-2 Validated
Drive, certified and tested to NIST
FIPS 140-2 Level 2 requirements
and with the fastest speeds of
iStorage’s Secure Drive line.
Sporting an easy-to-use keypad
design that is impervious to dust
and grit, with a software free setup
and operation, the diskAshur PRO
enables you to access the drive
simply and easily with your own
unique PIN. And with a super fast
integrated USB 3.0 cable, you can
access your data faster than ever
before.
diskAshur PRO
Quick Start Guide
1
2
3
4
3
1
2 SHIFT button
UNLOCK button
LED Indicator lights 4
LOCK button
When you first plug in the
diskAshur PRO, the unit will do
a self-test to verify all security
components are working properly.
The LEDs will go through 3 test stages RED , GREEN , and BLUE .
This will be followed by three
GREEN flashes on a successful
test. Any test failure will leave the
unit in an interoperable state with
the RED LED flashing. First Time Use
Before the drive can be used, the Admin PIN MUST be set. The LED will display Solid BLUE and Solid GREEN to indicate the diskAshur PRO is waiting for a PIN to be set.
To Set-up the Admin PIN:
1. Press UNLOCK + 9. The LED will change to Solid BLUE and Blinking GREEN .
2. Enter the new Admin PIN and press UNLOCK key. If accepted the GREEN LED
will flash for 3 short blinks, then return to Solid BLUE and Blinking GREEN .
3. Re-enter the Admin PIN and press the UNLOCK key. If accepted the GREEN LED will be Solid for 3 seconds.
4. LED will then turn BLUE and remain in Admin mode for 30 seconds or if the
LOCK key is pressed, will return the drive to a standby state.
5. The Admin PIN is now set and will allow access to the drive or the Admin features.
6. To UNLOCK the drive, exit Admin by pressing the LOCK button. Then enter the
new PIN and press UNLOCK.
*Note: PINs must be a minimum length of 7 maximum 16 digits.
Cannot contain all consecutive numbers (2345678 or 9876543)
Cannot contain all same number (1111111)
The SHIFT key can be used for additional combinations.
SHIFT + 1 are a separate value than just 1.
TM
PRO ®