Computer Tech Link Vector - Manual (Page 7)

- 7 -
Federal Communications Commission
Radio Frequency Interference
Statement
This equipment generates and uses radio frequency and if not installed and used properly (that
is, in strict accordance with the manufacturer's instructions) may cause interference to radio and
television reception. It has been tested and found to comply with the limits for a Class B FCC
computing device in accordance with the specifications in Subpart J of Part 15 of FCC rules,
which are designed to provide reasonable protection against such interference in a commercial
installation. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Re-orient the receiving antenna.
• Relocate the computer with respect to the receiver.
• Move the computer away from the receiver.
• Plug the computer into a different outlet so that the computer and receiver are on
different branch circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician for
additional suggestions. The user may find the following booklet prepared by the Federal
Communications Commission helpful:
"How to Identify and Resolve Radio/TV Interference Problems"
This booklet is available from the U.S. Government Printing Office, Washington DC
20402. Stock No. 004-000-00345-4.
NOTE The user must use shielded interface cables in order to maintain FCC compliance.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.