Cub Cadet SERIES 3000 GT 3200 - Manual (Page 19)

19
Using the REVERSE CAUTION
MODE key position
The REVERSE CAUTION MODE
position of the key switch module allows
the machine to be operated in reverse
with the blades (PTO) engaged.
IMPORTANT: Mowing in reverse is
not recommended.
Use extreme caution while
operating the tractor in the
“Reverse Caution Mode”.
Always look down and
behind before and while
backing. Do not operate the
tractor when children or oth-
ers are around. Stop the
tractor immediately if some-
one enters the area.
To use the REVERSE CAUTION
MODE, proceed as follows:
IMPORTANT: The operator MUST be
seated in the tractor seat.
1. Start the engine as previously
instructed in this Operator’s
Manual.
2. Turn the key from the NORMAL
MOWING (Green) position to the
REVERSE CAUTION MODE
(Yellow) position of the key switch
module. Refer to Figure 12.
3. Depress the REVERSE PUSH
BUTTON (Orange/Triangular
Button) at the top/right corner of
the key switch module. The red
indicator light at the top/left corner
of the key switch module will be
“ON” while activated. Refer to
Figure 12.
4. Once activated (indicator light
“ON”), the tractor can be driven in
reverse with the cutting blades
(PTO) engaged.
5. Always look down and behind
before and while backing to make
sure no children are around.
6. After resuming forward motion,
return the key to the NORMAL
MOWING position.
IMPORTANT: The REVERSE CAUTION
MODE will remain activated until:
• The key switch is turned to either
the NORMAL MOWING or STOP
position.
• The operator leaves the seat.
Follow the previous instructions to
re-activate.
Figure 12
Turn
Key
Step 1 - Start engine,
release key, key
returns to Normal
Step 2 - Turn
Key to Reverse
Caution Mode
Step 3 - Depress
Reverse Push
Step 4 - Indicator
Light comes “ON”
to alert operator
KEY SWITCH MODULE
Button to activate
of activation
Mowing position
position