Country Home Products SUBURBANTM - Manual (Page 14)

DR ® POWERWAGON ™ Safety & Operating Instructions 8
Because of the way the DR ® POWERWAGON ™
body is balanced, you may find that you won't be
able to lift the body to dump it if you are
carrying a very heavy load. In this case, you'll
need to manually unload part of what you are
hauling from the back of the bed, until the load is
light enough to allow the bed to tilt forward
when you lift up on the dump handle or back of
the body.
If you have the wooden stake body you can
remove the front panel for easy dumping. See
page 9 for more information on using the
optional stake body.
Changing Bodies
If you've purchased the optional stake body with your DR ® POWERWAGON ™ you'll find it's quite
simple to change bodies.
To change from the molded body to the stake body, you simply release the dump latch, tilt the
molded body forward and lift it off the mainframe. Allow the pivot bushings to slide out of the pivot
brackets as you lift the body up (Figure 15).
When placing the stake body on the frame, set
the pivot bushings into the brackets and slide
the body in place. Be sure the dump latch is
secure before operating the machine.
Figure 14
Figure 15