Connect the battery wires, Fill the machine with oil and gas, Check the tire pressure – Country Home Products SUBURBANTM User Manual

Page 8

Advertising
background image

DR

®

POWERWAGON

Safety & Operating Instructions

2

Connect the Battery Wires

Electric-Starting Model: Connect the red wire
from the battery to the red wire on the wiring
harness (Figure 3).






Fill the Machine with Oil and
Gas

1. Put the recommended amount of SAE30

detergent oil into the oil reservoir (Figure
4)
. Fill the oil to the level indicated on the
dipstick.

Note: There may be some oil in the
reservoir from factory testing. Check the
dipstick frequently as you fill to avoid
overfilling.

Please refer to your engine manufacturer's
owner's manual for more detailed oil
information.

2. Fill the gas tank (Figure 4) with fresh

unleaded gas to within 1/4" of the top to
allow for fuel expansion. Please refer to
your engine manufacturer's owner's manual for more specific fuel recommendations.

Check the Tire Pressure

Recommended tire pressures are listed below.

Please Note: The heavier the load the higher
the tire pressure should be. However, do not
exceed the maximum recommended load or
pressure.

Figure 3

Figure 4

Figure 5

Tire Pressure

Standard Tires 14-20 lbs. psi

All-Terrain Tires 14-20 lbs. psi

Caster Wheel 50 lbs. psi

Advertising