Corega WLUSB2GO - Manual (Page 20)

19
WLUSB2GO Manual
19
mend you to select [Infrastructure].
• Transmit power: the amount of power used by a radio trans-
ceiver to send the signal out. User can choose power value
by sliding the bar.
• [RTS Threshold] and [Fragment Threshold] : We recommend
you to use the default value 2312. User can adjust threshold
numbers by sliding the bars or key in the values directly.
3. Click [OK] and the set AP will appear in the [Profile] tab.
6.2 Profile
• [Add]: Click [Add] to add a new profile.
• [Delete]: to delete a profile, select one profile name and click
[Delete].
• [Edit]:to edit the setting of a profile, select the profile and
click [Edit].
• [Activate]: to activate the selected profile, select the profile
and click [Activate].