Compatible Systems 10/100 - Manual (Page 7)

Chapter 2 - Basic Configuration Guide 4
Chapter 2 - Basic Configuration Guide
This chapter briefly discusses the major parameters that must be set in order to use the 10-100
Ethernet - DES I/O card as part of your IntraPort Carrier VPN Access Server.
Configuration instructions in this chapter are given for Ethernet 0 on Slot 0. If your server has
multiple slots populated, then you will need to repeat this setup for the other interfaces. The
slot number comes first and is separated from the interface number by a colon (e.g., Ethernet
1:0, Ethernet 2:0, etc.). If other types of I/O cards are in use, then you will need to consult the
Administrator’s Guide for the each I/O card for configuration guidelines.
Detailed information on the meaning of the server’s parameters is provided in the Compati-
View Management Software Reference Guide and the Text-Based Configuration and Command
Line Management Reference Guide. You should use this list as a starting point to look up more
specific information in the other documents.
There are a number of parameter settings which are optional, in the sense that they are not
required for all installations. These settings are not covered in this chapter.
In this chapter:
CV = CompatiView
TB = Text-Based Configuration
v Note: This Basic Configuration Guide does not include information on setting up packet
filters. See the CompatiView Management Software Reference Guide or Text-Based Config-
uration and Command Line Management Reference Guide regarding IP packet filters for
more information.