ClearSounds CSC600 - Manual (Page 8)

8 – ENGLISH
4 On completion of the call, press the SPEAKER button again.
Receiving/Answering A Call Using The Speakerphone
1 Press the SPEAKER button while the phone is ringing to answer.
2 Adjust the volume to fit your need (Same as above).
3 On completion of the call, press the SPEAKER button again.
Switch between Handset and Speakerphone
While on a handset call, press the
SPEAKER button and replace the
handset in the cradle.
While on a speakerphone call, lift the handset.
Using the Amplification Function
The CSC600 Phone has an “AMP” button that controls the loudness
and tone of the handset. Without pressing the “AMP” button, you
are able to amplify the handset up to 30 dB of amplification. Once
the “AMP” button is pressed, an extra level of amplification is added
providing 30 to 50 dB of gain and tone control.
Voice Amplification and Tone
Your CSC600 Phone is equipped with a specialized amplification
function designed to fit your needs. You can adjust the volume and tone
(sound frequency range) of the incoming voice by simply adjusting
Volume and Tone Controls. To use the specialized amplification boost
and tone control features, follow these directions.
1 Once you have dialed the phone or answered a call, press the “AMP”
(amplify) button. This turns the incoming voice amplifier ON. When the
amplifier is ON, you will see the red light on the left side of the “AMP”
button light up.
2 Once you have engaged the amplification feature you will have the
ability to adjust the volume and tone to fit your needs by adjusting the
VOLUME and TONE controls until you find the right levels for you. The
Volume Control increases sound volume. Slide the Volume Control to
the right to increase the volume and slide it to the left to decrease the
volume. The Tone Control allows you to fit your specific hearing needs.
Slide the Tone Control to the left to boost the lower frequency range.
Slide the Tone Control to right to boost the high frequency range. This
allows individuals with BOTH high frequency and low frequency hearing
loss to use the CSC600 Phone.
CAUTION: This telephone can produce very high (loud) sound
levels. Repeated incremental exposure to amplification levels
greater than 18 dB may be harmful to people without hearing loss.
Always adjust the volume control to the minimum setting after
using the phone and alert other users that hearing damage can