Cisco 7200 VXR User Manual

Page 6

Advertising
background image

1-6

Cisco 7200 VXR Installation and Configuration Guide

OL-5013-09

Chapter 1 Cisco 7200 VXR Product Overview

Cisco 7204VXR Overview

Figure 1-2

Cisco 7204VXR Router—Rear View

The NPE-G2 and NPE-G1 have external connectors and status LEDs for the three Gigabit Ethernet
interfaces as well as console and auxiliary ports. The network processing engines NPE-100 through
NPE-400 or network services engine (NSE-1) have no external connectors or LEDs. There is a handle
for removing and installing the network processing engine or network services engine and two captive
installation screws for securing it to the chassis.

The Port Adapter Jacket Card is supported in the I/O controller slot.

The Cisco 7204VXR router comes equipped with one 280W AC-input power supply. (A 280W DC-input
power supply option is available.) In

Figure 1-2

, a Cisco 7204VXR router is configured with a single

AC-input power supply. (A power supply filler plate is installed over the second power supply bay.) A
fully configured Cisco 7204VXR router operates with only one installed power supply; however, a
second, optional power supply of the same type provides hot-swappable, load-sharing, redundant power.

Note

The Cisco 7204VXR does not support a mixture of AC- and DC-input power.

The power supply has the router’s main power switch and either an AC-input power receptacle or a
hardwired DC-input power cable (depending on the type of installed power supply).

Caution

Do not mix power supplies in the Cisco 7204VXR. In dual power supply router configurations, both
power supplies must be of the same type (two AC-input power supplies or two DC-input power supplies).

Adjacent to the power supply bays are two chassis grounding receptacles that provide a chassis ground
connection for ESD equipment or a two-hole grounding lug. (See

Figure 1-2

.)

1

Chassis grounding receptacles

6

Network processing engine or network
services engine

2

Power supply filler plate

7

AC-input power supply

3

Power switch

8

PWR OK LED

4

AC power cable-retention clip

9

AC power supply receptacle

5

Internal fans

84396

NETWORK PROCESSING ENGINE-300

1

5

2

4

3

8

9

7

6

Advertising