Canon IMAGERUNNER 2020 - Manual (Page 242)

Adjusting the Machine 7-40
Rou
tin
e Ma
int
ena
nce
7
Setting the Fixing Unit Offset Mode
While making prints, offset (a condition that a previously printed image also
appears faintly on the next output) may occur when you suddenly increase the
width of the paper for printing. This mode enables you choose whether to set a high
priority on avoiding offset or on speed.
1
Press [Additional Functions]
➞ [
] or [ ] until
<ADJUST./CLEANING> appears
➞ press [OK].
If necessary, see the screen shots in steps 1 and 2 of "Print Quality and Density
Improvement," on p. 7-35.
The <ADJUST./CLEANING> menu appears.
2
Press [ ] or [ ] until <FIX. UNIT OFFSET> appears
➞
press [OK].
The <FIX. UNIT OFFSET> menu appears.
3
Press [ ] or [ ] to select <SPEED PRIORITY 1>,
<SPEED PRIORITY 2>, or <OFF>
➞ press [OK].
Details of each item are shown below.
<OFF>: Quality is set as a high priority.
<SPEED PRIORITY 1>: Speed is set as a high priority.
<SPEED PRIORITY 2>: Speed is set as a medium priority.
The Fix. Unit Offset mode is set.
4
Press [Stop] to return to the Standby display.
OK
Additional
Functions
OK
ADJUST./CLEANING
10.FIX. UNIT OFFSET
FIX. UNIT OFFSET
OFF
OK
FIX. UNIT OFFSET
SPEED PRIORITY1
ADJUST./CLEANING
11.AUTO ADF DRTY ADJ
Stop