Chamberlain 2000SDC-R User Manual
Garage door opener owner’s manual, For residential use only
Advertising
TM
For Residential Use Only
Garage Door Opener
Owner’s Manual
Model 2000SDC-R
1/2 HP
Model 1000SDC-R
1/3 HP
■
Please read this manual and the enclosed safety materials carefully!
■
Fasten the manual near the garage door after installation.
■
The door WILL NOT CLOSE unless the Protector System
®
is connected and
properly aligned.
■
Periodic checks of the opener are required to ensure safe operation.
■
The model number label is located on the back of your opener.
®
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Owner’s Manual
- Contents
- Safety alert symbols
- Safety Information and Precautions
- Hardware Supplied
- Carton Inventory
- SECTIONAL Door or ONE-PIECE Door with Track Installation
- ONE-PIECE Door Without Track Installation
- Assembly Section
- Installation Section
- IMPORTANT INSTALLATION INSTRUCTIONS
- 1) Determine Header Bracket Location
- 2) Install the Header Bracket
- 3) Attach the Rail to the Header Bracket
- The Protector System ®
- 4) Install the Safety Reversing Sensor(Receiving and Sending Eyes)
- 5) Position the Opener
- 6) Hang the Opener
- 7) Install the Door Control and Connect all Wiring
- 8) Electrical Requirements
- 9) Complete Safety Reversing SensorInstallation
- 10) Install the Lights and Lens
- 11) Attach the Manual Release Rope and Handle
- 12) Fasten Door Bracket
- 13) Connect Door Arm to Trolley
- Adjustment Section
- IMPORTANT SAFETY INSTRUCTIONS
- Care of Your Opener
- Maintenance Schedule
- Operation of Your Opener
- Operation of the Door Controls
- Receiver & Remote Control Programming
- Having a Problem?
- Repair Parts
- Accessories Available For Your Opener
- Index
- HOW TO ORDER
- ONE-YEAR LIMITED WARRANTY