Canon 2.2 User Manual
Page 31
Advertising
30
30
2
Click the [
] button.
¿
The [Click white balance] window appears.
3
Click on a point that is to be the standard for white.
Click white balance window
Click
4
Click the [Apply to camera and execute test
shooting] button.
¿
A shot will be taken again using the part of the image in step 3
clicked as the standard for white and the shot image is displayed
in the [Test Shooting] window.
O
The test image will not be saved. To save the test image, click
the [
button.
O
To close the [Test Shooting] window, click the [Close] button.
O
You can take a test shot even when flash is not used.
For a list of the [Test Shooting] window functions, refer to
Advertising