Cannondale Bicycles User Manual
Page 44
40
(4) While pushing the wheel firmly to the top of the slots in the fork
dropouts, and at the same time centering the wheel rim in the fork,
rotate the quick-release lever upwards and push it into the CLOSED
position (fig. 11 & 12). The lever should be parallel to the fork blade
and curved toward the wheel.
CAUTION: If you can fully close the quick release
without wrapping
your fingers around the fork blade for leverage, and the lever
does
not leave a clear imprint in the palm of your hand, the tension is
insufficient. Open the lever; turn the tension adjusting nut clockwise
a quarter turn; then try again.
(5) If the lever cannot be pushed all the way to a position parallel to the
fork blade, return the lever to the OPEN position. Then turn the tension
adjusting nut counterclockwise one-quarter turn and try tightening the
lever again.
(6) Close the brake shoes; then spin the wheel to make sure that it is
centered in the frame and clears the brake shoes.
!
2000 owner's manual 10/27/99 10/27/99 11:16 AM Page 40