Cannondale Bicycles - Manual (Page 58)

54
shifter design which they believe will give the best results on your bike.
The different types of shifters and their operation are illustrated in
figures 18A through 18H. Identify the shifters on
your bike before
reading on.
The vocabulary of shifting can be pretty confusing. A downshift is a
shift to a “slower” gear, one which is easier to pedal. An upshift is a
shift to a "faster", harder to pedal gear. What's confusing is that what's
happening at the front derailleur is the opposite of what's happening at
the rear derailleur (for details, read the instructions on Shifting the
Rear Derailleur and Shifting the Front Derailleur below). For example,
you can select a gear which will make pedaling easier on a hill (make a
downshift ) in one of two ways: shift the chain down the gear
“steps” to a smaller gear at the front, or up the gear “steps” to a
larger gear at the rear. So, at the rear gear cluster, what is called a
downshift looks like an upshift. The way to keep things straight is to
remember that shifting the chain in towards the centerline of the bike
is for accelerating and climbing and is called a downshift. Moving
the chain out or away from the centerline of the bike is for speed and is
called an
upshift.
Whether upshifting or downshifting, the bicycle derailleur system design
requires that the drive chain be moving forward and be under at least
some tension. A derailleur will shift
only if you are pedaling forward.
fig. 18H
u p s h i f t
d o w n
s h i f t
u p
s h i f t
d o w n
s h i f t
u p
s h i f t
d o w n
s h i f t
u p
s h i f t
d o w n
s h i f t
d o w n
s h i f t
u p
s h i f t
d o w n s h i f t
u p s h i f t
d o w n s h i f t
u p
s h i f t
u p s h i f t
d o w n
s h i f t
fig. 18E
fig. 18F
fig. 18G
2000 owner's manual 10/27/99 10/27/99 11:16 AM Page 54