Save these instructions, English, Page 7 – Intex SF90110T Krystal Clear 2014 User Manual

Page 7

Advertising
background image

193

PO

SAVE THESE INSTRUCTIONS

(193PO) MODEL SF90110T SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/21/2013

English

POOL INLET - NOZZLE & PLUNGER VALVE SETUP (OPTIONAL)

Page 7

1. In a counter-clockwise motion unscrew plunger valve

union from the threaded strainer connector

(26) (see

drawing 5). Be careful not to lose the step rubber

washer

(23). Place the plunger valve on the ground in

a safe place.

2. In a counter-clockwise motion unscrew the strainer

nut

(24) from the threaded connector (26). Leave the

flat washer

(25) on the connector (26).

3. Install the nozzle and plunger valve at the upper

position of pool inlet.

From the inside of the pool liner

insert the connector

(26) into one of the pre-cut holes

with the washer remaining on the connector to be

placed against the inside of the liner wall.

4. Before assembly, lubricate the threads with a

petroleum jelly. With the flat side of the strainer nut

(24)

facing the outside wall of the liner in a clockwise

motion screw the strainer nut

(24) back onto the

threaded connector

(26) (see drawing 6).

5. Finger tighten the adjustable pool inlet nozzle (27)

and the strainer nut

(24) onto the threaded

connector

(26).

6. Grasp the plunger valve assembly. Make sure the

step washer

(23) is in place.

7. In a clockwise motion screw the plunger valve union

back onto the threaded connector

(26) (see

drawing 7).

8. In a clockwise motion turn the plunger valve handle

to close position. Ensure the plunger valve is securely

closed. This will prevent water from flowing out during

filling of the pool

(see drawing 8).

9. NOTE: Never cover the vacuum release valve (36)

unless it is damaged or leaking. Replace the vacuum

release valve immediately.

10. Adjust the direction of nozzle head pointing away from

the pool outlet for a better circulation result

(see

drawing 9).

11. The pool liner is now ready to fill with water. Consult

the above-ground-pool owner’s manual for filling

instructions.

5

2

1

7

1

2

6

25

26 27

INSIDE

LINER WALL

24

9

WATER

FLOW

POOL

36

8

INSIDE

LINER WALL

Advertising