CDA WC430 - Manual (Page 3)

• The plastic housing on the water inlet pipe contains an electrically operated valve. The wires that connect to this valve
are inside the inlet hose. Do not cut through the inlet hose, and do not put the plastic housing in water.
• Children could get locked inside the appliance. Therefore when disposing of an old appliance, cut off the plug and set
aside, and damage the door lock so that the door can no longer be closed.
Recommendations
• To reduce energy and water consumption, remove all dirt residues from the dishes prior to loading the dishwasher.
• Only run the dishwasher when fully loaded.
• Place hollow items (bowls, glasses and pans) face down in the basket.
• Do not put dishes or cutlery with tobacco ash, wax, lubricating grease or paint residues in the dishwasher.
Before First Use
• Set the water softener level as required by the water hardness in the area.
• Add 2kg of salt into the salt compartment and then fill with water to the top of the salt compartment.
• Remove all the packaging materials from the interior of the dishwasher.
• Fill the rinse aid compartment.
• Run a hot programme without any dishes in the dishwasher.
Control Panel
Programme Indicator Lights
Programme
Selection Button
Salt
Indicator
Light
Quick Wash
Indicator Light
Quick Wash
Button
Delay Timer Indicator
Lights
Delay Timer
Button Power
Button
Programme indicator lights
Programme selection button
Salt indicator light
Quickwash indicator light
Delay timer
indicator lights
Delay timer button
Power button
2
WC430 Manual.indd 3 3/6/09 11:19:02