CDA WC430 - Manual (Page 8)

General Information
To adjust the height of the upper basket:
• Open the basket retaining clips, as shown in figure 8, by turning them to
the side.
• Remove the upper basket, and relocate the alternate set of wheels on the
runner, as shown in figure 9, pushing the basket back into place.
• Close the basket retaining clips.
• The images below are designed as guidance as to best practice for loading
the dishwasher.
Information on reference tests implemented in compliance
with EN 50242
Appliance loaded in accordance with standard specifications.
Example of loaded dishwasher: See below.
Capacity: 9 place settings
Reference programme: Light wash
Rinse-aid setting: 5
Detergent: 5g+22g
Height-adjustable top-basket must be fitted in the uppermost position.
If the reference tests do not comply fully with EN 50242, e.g., degree of
soiling, type of dishes and cutlery, etc., contact the appliance manufacturer
before starting the test.
Dishwasher Baskets
To adjust the height of the upper basket:
1. Open the basket retaining clips, as shown in figure 7, but turning them to
the side.
2. Remove the upper basket, and relocate the alternate set of wheels on the
runner, as shown in figure 8, pushing the basket back into place.
3. Close the basket retaining clips.
The images below are designed as guidance as to best practice for loading
the dishwasher.
fig 7
fig 8
Upper basket
Lower basket
Bad loads
Dishwasher Baskets
To adjust the height of the upper basket:
1. Open the basket retaining clips, as shown in figure 7, but turning them to
the side.
2. Remove the upper basket, and relocate the alternate set of wheels on the
runner, as shown in figure 8, pushing the basket back into place.
3. Close the basket retaining clips.
The images below are designed as guidance as to best practice for loading
the dishwasher.
fig 7
fig 8
Upper basket
Lower basket
Bad loads
fig. 8
fig. 9
Upper basket Lower basket
7
WC430 Manual.indd 8 3/6/09 11:19:07